Greases and oil compounds

Silicone greases start with a base oil of silicone fluid, to which are added various additives and fillers (metal soap, etc.). Silicone greases exhibit thermal oxidation stability over a wide temperature range, offer good moisture-resistance, and are used primarily for lubrication.

 

Silicone oil compounds are products with a grease-like consistency. They are produced by blending materials such as silica powder into a base oil of silicone fluid. They exhibit thermal oxidation stability over a wide temperature range and have outstanding electrical properties and water repellency. Silicone oil compounds are used primarily in electrical insulators and seals, and for heat dissipation and water repellency.


Features
Heat and cold resistance
Because the silicone fluid base oil has good resistance to heat and cold, the drop point is high, there is little oil separation, and volatile content is low.

Moisture resistance
These products have good resistance to water and moisture. Silicone greases can be left underwater for long periods; the surface will turn white, but there is almost no internal change.

Safety
The silicone fluid base oil is chemically inactive, so these products pose almost no risk to humans and animals.

Efficiency
Excellent performance even when used in small amounts.

 

Typical Products

 

Category

 

 

Applications

 

 

Grade

 

 

Features

 

GreasesLow-temperature lubricationG-30 SeriesSuitable for lubrication in extremely low temperature applications, in which petroleum greases cannot be used
High-temperature lubricationG-40 SeriesSuitable for lubrication of sealed bearings, Performance complies with MIL-L-15719A.
G-420Good lubrication particularly at high temperatures
Solvent-resistant lubricantFG-720 SeriesEspecially good boundary lubrication and solvent resistance
Non-mineral oil lubrication for rubbersG-411For rubber cups of automotive brakes
Plastic lubricationG-501Does not cause stress cracking in plastic, Good lubrication for steel on steel
Adhesive applications (torque, damper)G-330 SeriesGeneral purpose
G-340 SeriesFor low temperature applications, Little change in torque values in temperatures ranging from -30°C to +60°C
G-630 SeriesFor bearings, Good feel, Base oil is non-silicone
Oil compoundsElectrical insulation, sealsKS-62FHeat-resistant, Paste consistency
KS-62MHeat-resistant
KS-63WGeneral purpose
KS-64FPaste
KS-64Performance meets MIL-S-8660B specifications. General purpose
Insulator protection in salty air, electrical insulationKS-63GComplies with JRS standards
Heat dissipationKS-609Thermal conductivity: 0.73W/m·K, General purpose
KS-613Thermal conductivity: 0.76 W/m·K, Suitable for thermister potting
G-747Thermal conductivity: 0.90W/m·K
G-775Thermal conductivity: 3.6 W/m·K, Highly resistant to "pump-out"
G-776Thermal conductivity: 1.3 W/m·K*, Low viscosity, and yet low oil bleed, Solvent-diluted type
G-777Thermal conductivity: 3.3 W/m·K, All-purpose type
G-765Thermal conductivity: 2.9W/m·K, Main application: IGBT
G-750Thermal conductivity: 3.5W/m·K, Main application: IGBT
G-751Thermal conductivity: 4.5W/m·K, Main application: CPU
X-23-7762Thermal conductivity: 4.0 W/m·K (6.0W/m·K*), Solvent-diluted type, Main application: CPU
X-23-7783DThermal conductivity: 3.5 W/m·K (5.5W/m·K*), Solvent-diluted type, Main application: CPU
X-23-7868-2DThermal conductivity: 3.6W/m·K (6.2W/m·K*), Solvent-diluted type, Main application: CPU
X-23-7921-5Thermal conductivity: 6.0W/m·K, Main application: CPU
Electrical conductionKS-660Suitable for untistatic sealing
KS-660BHigh lubricity version of KS-660
High vacuum sealsHIVAC-GGood thermo-oxidative stability and chemical stability, Can be used for high vacuums of 10-6Torr
Rustproof sealsKS-622Good rustproofing effect on copper
Valve sealsKS-65ASuitable for sealing and lubrication of valves, stopcocks, and packing of common chemical equipment
KS-623
Silicone rubbersKS-650NDoes not cause swelling of silicone rubber, Good electrical insulation
KS-651Does not cause swelling of silicone rubber, Good electrical properties and temperature characteristics
Optical applicationsOptsealGood light transmissivity, Refractive index (25°C) 1.4690, Non-flowable
Optseal-LGood light transmissivity, Refractive index (25°C) 1.4690, Slightly flowable  
 
* After evaporation of solvent 
 
Powered by MakeWebEasy.com